You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
351 lines
14 KiB
351 lines
14 KiB
-- megafunction wizard: %ALTPLL%
|
|
-- GENERATION: STANDARD
|
|
-- VERSION: WM1.0
|
|
-- MODULE: altpll
|
|
|
|
-- ============================================================
|
|
-- File Name: pll.vhd
|
|
-- Megafunction Name(s):
|
|
-- altpll
|
|
--
|
|
-- Simulation Library Files(s):
|
|
-- altera_mf
|
|
-- ============================================================
|
|
-- ************************************************************
|
|
-- THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
|
|
--
|
|
-- 22.1std.2 Build 922 07/20/2023 SC Lite Edition
|
|
-- ************************************************************
|
|
|
|
|
|
--Copyright (C) 2023 Intel Corporation. All rights reserved.
|
|
--Your use of Intel Corporation's design tools, logic functions
|
|
--and other software and tools, and any partner logic
|
|
--functions, and any output files from any of the foregoing
|
|
--(including device programming or simulation files), and any
|
|
--associated documentation or information are expressly subject
|
|
--to the terms and conditions of the Intel Program License
|
|
--Subscription Agreement, the Intel Quartus Prime License Agreement,
|
|
--the Intel FPGA IP License Agreement, or other applicable license
|
|
--agreement, including, without limitation, that your use is for
|
|
--the sole purpose of programming logic devices manufactured by
|
|
--Intel and sold by Intel or its authorized distributors. Please
|
|
--refer to the applicable agreement for further details, at
|
|
--https://fpgasoftware.intel.com/eula.
|
|
|
|
|
|
LIBRARY ieee;
|
|
USE ieee.std_logic_1164.all;
|
|
|
|
LIBRARY altera_mf;
|
|
USE altera_mf.all;
|
|
|
|
ENTITY pll IS
|
|
PORT
|
|
(
|
|
inclk0 : IN STD_LOGIC := '0';
|
|
c0 : OUT STD_LOGIC
|
|
);
|
|
END pll;
|
|
|
|
|
|
ARCHITECTURE SYN OF pll IS
|
|
|
|
SIGNAL sub_wire0 : STD_LOGIC_VECTOR (4 DOWNTO 0);
|
|
SIGNAL sub_wire1 : STD_LOGIC ;
|
|
SIGNAL sub_wire2 : STD_LOGIC ;
|
|
SIGNAL sub_wire3 : STD_LOGIC_VECTOR (1 DOWNTO 0);
|
|
SIGNAL sub_wire4_bv : BIT_VECTOR (0 DOWNTO 0);
|
|
SIGNAL sub_wire4 : STD_LOGIC_VECTOR (0 DOWNTO 0);
|
|
|
|
|
|
|
|
COMPONENT altpll
|
|
GENERIC (
|
|
bandwidth_type : STRING;
|
|
clk0_divide_by : NATURAL;
|
|
clk0_duty_cycle : NATURAL;
|
|
clk0_multiply_by : NATURAL;
|
|
clk0_phase_shift : STRING;
|
|
compensate_clock : STRING;
|
|
inclk0_input_frequency : NATURAL;
|
|
intended_device_family : STRING;
|
|
lpm_hint : STRING;
|
|
lpm_type : STRING;
|
|
operation_mode : STRING;
|
|
pll_type : STRING;
|
|
port_activeclock : STRING;
|
|
port_areset : STRING;
|
|
port_clkbad0 : STRING;
|
|
port_clkbad1 : STRING;
|
|
port_clkloss : STRING;
|
|
port_clkswitch : STRING;
|
|
port_configupdate : STRING;
|
|
port_fbin : STRING;
|
|
port_inclk0 : STRING;
|
|
port_inclk1 : STRING;
|
|
port_locked : STRING;
|
|
port_pfdena : STRING;
|
|
port_phasecounterselect : STRING;
|
|
port_phasedone : STRING;
|
|
port_phasestep : STRING;
|
|
port_phaseupdown : STRING;
|
|
port_pllena : STRING;
|
|
port_scanaclr : STRING;
|
|
port_scanclk : STRING;
|
|
port_scanclkena : STRING;
|
|
port_scandata : STRING;
|
|
port_scandataout : STRING;
|
|
port_scandone : STRING;
|
|
port_scanread : STRING;
|
|
port_scanwrite : STRING;
|
|
port_clk0 : STRING;
|
|
port_clk1 : STRING;
|
|
port_clk2 : STRING;
|
|
port_clk3 : STRING;
|
|
port_clk4 : STRING;
|
|
port_clk5 : STRING;
|
|
port_clkena0 : STRING;
|
|
port_clkena1 : STRING;
|
|
port_clkena2 : STRING;
|
|
port_clkena3 : STRING;
|
|
port_clkena4 : STRING;
|
|
port_clkena5 : STRING;
|
|
port_extclk0 : STRING;
|
|
port_extclk1 : STRING;
|
|
port_extclk2 : STRING;
|
|
port_extclk3 : STRING;
|
|
width_clock : NATURAL
|
|
);
|
|
PORT (
|
|
inclk : IN STD_LOGIC_VECTOR (1 DOWNTO 0);
|
|
clk : OUT STD_LOGIC_VECTOR (4 DOWNTO 0)
|
|
);
|
|
END COMPONENT;
|
|
|
|
BEGIN
|
|
sub_wire4_bv(0 DOWNTO 0) <= "0";
|
|
sub_wire4 <= To_stdlogicvector(sub_wire4_bv);
|
|
sub_wire1 <= sub_wire0(0);
|
|
c0 <= sub_wire1;
|
|
sub_wire2 <= inclk0;
|
|
sub_wire3 <= sub_wire4(0 DOWNTO 0) & sub_wire2;
|
|
|
|
altpll_component : altpll
|
|
GENERIC MAP (
|
|
bandwidth_type => "AUTO",
|
|
clk0_divide_by => 2000,
|
|
clk0_duty_cycle => 50,
|
|
clk0_multiply_by => 1007,
|
|
clk0_phase_shift => "0",
|
|
compensate_clock => "CLK0",
|
|
inclk0_input_frequency => 20000,
|
|
intended_device_family => "Cyclone IV E",
|
|
lpm_hint => "CBX_MODULE_PREFIX=pll",
|
|
lpm_type => "altpll",
|
|
operation_mode => "NORMAL",
|
|
pll_type => "AUTO",
|
|
port_activeclock => "PORT_UNUSED",
|
|
port_areset => "PORT_UNUSED",
|
|
port_clkbad0 => "PORT_UNUSED",
|
|
port_clkbad1 => "PORT_UNUSED",
|
|
port_clkloss => "PORT_UNUSED",
|
|
port_clkswitch => "PORT_UNUSED",
|
|
port_configupdate => "PORT_UNUSED",
|
|
port_fbin => "PORT_UNUSED",
|
|
port_inclk0 => "PORT_USED",
|
|
port_inclk1 => "PORT_UNUSED",
|
|
port_locked => "PORT_UNUSED",
|
|
port_pfdena => "PORT_UNUSED",
|
|
port_phasecounterselect => "PORT_UNUSED",
|
|
port_phasedone => "PORT_UNUSED",
|
|
port_phasestep => "PORT_UNUSED",
|
|
port_phaseupdown => "PORT_UNUSED",
|
|
port_pllena => "PORT_UNUSED",
|
|
port_scanaclr => "PORT_UNUSED",
|
|
port_scanclk => "PORT_UNUSED",
|
|
port_scanclkena => "PORT_UNUSED",
|
|
port_scandata => "PORT_UNUSED",
|
|
port_scandataout => "PORT_UNUSED",
|
|
port_scandone => "PORT_UNUSED",
|
|
port_scanread => "PORT_UNUSED",
|
|
port_scanwrite => "PORT_UNUSED",
|
|
port_clk0 => "PORT_USED",
|
|
port_clk1 => "PORT_UNUSED",
|
|
port_clk2 => "PORT_UNUSED",
|
|
port_clk3 => "PORT_UNUSED",
|
|
port_clk4 => "PORT_UNUSED",
|
|
port_clk5 => "PORT_UNUSED",
|
|
port_clkena0 => "PORT_UNUSED",
|
|
port_clkena1 => "PORT_UNUSED",
|
|
port_clkena2 => "PORT_UNUSED",
|
|
port_clkena3 => "PORT_UNUSED",
|
|
port_clkena4 => "PORT_UNUSED",
|
|
port_clkena5 => "PORT_UNUSED",
|
|
port_extclk0 => "PORT_UNUSED",
|
|
port_extclk1 => "PORT_UNUSED",
|
|
port_extclk2 => "PORT_UNUSED",
|
|
port_extclk3 => "PORT_UNUSED",
|
|
width_clock => 5
|
|
)
|
|
PORT MAP (
|
|
inclk => sub_wire3,
|
|
clk => sub_wire0
|
|
);
|
|
|
|
|
|
|
|
END SYN;
|
|
|
|
-- ============================================================
|
|
-- CNX file retrieval info
|
|
-- ============================================================
|
|
-- Retrieval info: PRIVATE: ACTIVECLK_CHECK STRING "0"
|
|
-- Retrieval info: PRIVATE: BANDWIDTH STRING "1.000"
|
|
-- Retrieval info: PRIVATE: BANDWIDTH_FEATURE_ENABLED STRING "1"
|
|
-- Retrieval info: PRIVATE: BANDWIDTH_FREQ_UNIT STRING "MHz"
|
|
-- Retrieval info: PRIVATE: BANDWIDTH_PRESET STRING "Low"
|
|
-- Retrieval info: PRIVATE: BANDWIDTH_USE_AUTO STRING "1"
|
|
-- Retrieval info: PRIVATE: BANDWIDTH_USE_PRESET STRING "0"
|
|
-- Retrieval info: PRIVATE: CLKBAD_SWITCHOVER_CHECK STRING "0"
|
|
-- Retrieval info: PRIVATE: CLKLOSS_CHECK STRING "0"
|
|
-- Retrieval info: PRIVATE: CLKSWITCH_CHECK STRING "0"
|
|
-- Retrieval info: PRIVATE: CNX_NO_COMPENSATE_RADIO STRING "0"
|
|
-- Retrieval info: PRIVATE: CREATE_CLKBAD_CHECK STRING "0"
|
|
-- Retrieval info: PRIVATE: CREATE_INCLK1_CHECK STRING "0"
|
|
-- Retrieval info: PRIVATE: CUR_DEDICATED_CLK STRING "c0"
|
|
-- Retrieval info: PRIVATE: CUR_FBIN_CLK STRING "c0"
|
|
-- Retrieval info: PRIVATE: DEVICE_SPEED_GRADE STRING "Any"
|
|
-- Retrieval info: PRIVATE: DIV_FACTOR0 NUMERIC "1"
|
|
-- Retrieval info: PRIVATE: DUTY_CYCLE0 STRING "50.00000000"
|
|
-- Retrieval info: PRIVATE: EFF_OUTPUT_FREQ_VALUE0 STRING "25.174999"
|
|
-- Retrieval info: PRIVATE: EXPLICIT_SWITCHOVER_COUNTER STRING "0"
|
|
-- Retrieval info: PRIVATE: EXT_FEEDBACK_RADIO STRING "0"
|
|
-- Retrieval info: PRIVATE: GLOCKED_COUNTER_EDIT_CHANGED STRING "1"
|
|
-- Retrieval info: PRIVATE: GLOCKED_FEATURE_ENABLED STRING "0"
|
|
-- Retrieval info: PRIVATE: GLOCKED_MODE_CHECK STRING "0"
|
|
-- Retrieval info: PRIVATE: GLOCK_COUNTER_EDIT NUMERIC "1048575"
|
|
-- Retrieval info: PRIVATE: HAS_MANUAL_SWITCHOVER STRING "1"
|
|
-- Retrieval info: PRIVATE: INCLK0_FREQ_EDIT STRING "50.000"
|
|
-- Retrieval info: PRIVATE: INCLK0_FREQ_UNIT_COMBO STRING "MHz"
|
|
-- Retrieval info: PRIVATE: INCLK1_FREQ_EDIT STRING "100.000"
|
|
-- Retrieval info: PRIVATE: INCLK1_FREQ_EDIT_CHANGED STRING "1"
|
|
-- Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_CHANGED STRING "1"
|
|
-- Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_COMBO STRING "MHz"
|
|
-- Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone IV E"
|
|
-- Retrieval info: PRIVATE: INT_FEEDBACK__MODE_RADIO STRING "1"
|
|
-- Retrieval info: PRIVATE: LOCKED_OUTPUT_CHECK STRING "0"
|
|
-- Retrieval info: PRIVATE: LONG_SCAN_RADIO STRING "1"
|
|
-- Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE STRING "Not Available"
|
|
-- Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE_DIRTY NUMERIC "0"
|
|
-- Retrieval info: PRIVATE: LVDS_PHASE_SHIFT_UNIT0 STRING "deg"
|
|
-- Retrieval info: PRIVATE: MIG_DEVICE_SPEED_GRADE STRING "Any"
|
|
-- Retrieval info: PRIVATE: MIRROR_CLK0 STRING "0"
|
|
-- Retrieval info: PRIVATE: MULT_FACTOR0 NUMERIC "1"
|
|
-- Retrieval info: PRIVATE: NORMAL_MODE_RADIO STRING "1"
|
|
-- Retrieval info: PRIVATE: OUTPUT_FREQ0 STRING "25.17500000"
|
|
-- Retrieval info: PRIVATE: OUTPUT_FREQ_MODE0 STRING "1"
|
|
-- Retrieval info: PRIVATE: OUTPUT_FREQ_UNIT0 STRING "MHz"
|
|
-- Retrieval info: PRIVATE: PHASE_RECONFIG_FEATURE_ENABLED STRING "1"
|
|
-- Retrieval info: PRIVATE: PHASE_RECONFIG_INPUTS_CHECK STRING "0"
|
|
-- Retrieval info: PRIVATE: PHASE_SHIFT0 STRING "0.00000000"
|
|
-- Retrieval info: PRIVATE: PHASE_SHIFT_STEP_ENABLED_CHECK STRING "0"
|
|
-- Retrieval info: PRIVATE: PHASE_SHIFT_UNIT0 STRING "deg"
|
|
-- Retrieval info: PRIVATE: PLL_ADVANCED_PARAM_CHECK STRING "0"
|
|
-- Retrieval info: PRIVATE: PLL_ARESET_CHECK STRING "0"
|
|
-- Retrieval info: PRIVATE: PLL_AUTOPLL_CHECK NUMERIC "1"
|
|
-- Retrieval info: PRIVATE: PLL_ENHPLL_CHECK NUMERIC "0"
|
|
-- Retrieval info: PRIVATE: PLL_FASTPLL_CHECK NUMERIC "0"
|
|
-- Retrieval info: PRIVATE: PLL_FBMIMIC_CHECK STRING "0"
|
|
-- Retrieval info: PRIVATE: PLL_LVDS_PLL_CHECK NUMERIC "0"
|
|
-- Retrieval info: PRIVATE: PLL_PFDENA_CHECK STRING "0"
|
|
-- Retrieval info: PRIVATE: PLL_TARGET_HARCOPY_CHECK NUMERIC "0"
|
|
-- Retrieval info: PRIVATE: PRIMARY_CLK_COMBO STRING "inclk0"
|
|
-- Retrieval info: PRIVATE: RECONFIG_FILE STRING "pll.mif"
|
|
-- Retrieval info: PRIVATE: SACN_INPUTS_CHECK STRING "0"
|
|
-- Retrieval info: PRIVATE: SCAN_FEATURE_ENABLED STRING "1"
|
|
-- Retrieval info: PRIVATE: SELF_RESET_LOCK_LOSS STRING "0"
|
|
-- Retrieval info: PRIVATE: SHORT_SCAN_RADIO STRING "0"
|
|
-- Retrieval info: PRIVATE: SPREAD_FEATURE_ENABLED STRING "0"
|
|
-- Retrieval info: PRIVATE: SPREAD_FREQ STRING "50.000"
|
|
-- Retrieval info: PRIVATE: SPREAD_FREQ_UNIT STRING "KHz"
|
|
-- Retrieval info: PRIVATE: SPREAD_PERCENT STRING "0.500"
|
|
-- Retrieval info: PRIVATE: SPREAD_USE STRING "0"
|
|
-- Retrieval info: PRIVATE: SRC_SYNCH_COMP_RADIO STRING "0"
|
|
-- Retrieval info: PRIVATE: STICKY_CLK0 STRING "1"
|
|
-- Retrieval info: PRIVATE: SWITCHOVER_COUNT_EDIT NUMERIC "1"
|
|
-- Retrieval info: PRIVATE: SWITCHOVER_FEATURE_ENABLED STRING "1"
|
|
-- Retrieval info: PRIVATE: SYNTH_WRAPPER_GEN_POSTFIX STRING "0"
|
|
-- Retrieval info: PRIVATE: USE_CLK0 STRING "1"
|
|
-- Retrieval info: PRIVATE: USE_CLKENA0 STRING "0"
|
|
-- Retrieval info: PRIVATE: USE_MIL_SPEED_GRADE NUMERIC "0"
|
|
-- Retrieval info: PRIVATE: ZERO_DELAY_RADIO STRING "0"
|
|
-- Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all
|
|
-- Retrieval info: CONSTANT: BANDWIDTH_TYPE STRING "AUTO"
|
|
-- Retrieval info: CONSTANT: CLK0_DIVIDE_BY NUMERIC "2000"
|
|
-- Retrieval info: CONSTANT: CLK0_DUTY_CYCLE NUMERIC "50"
|
|
-- Retrieval info: CONSTANT: CLK0_MULTIPLY_BY NUMERIC "1007"
|
|
-- Retrieval info: CONSTANT: CLK0_PHASE_SHIFT STRING "0"
|
|
-- Retrieval info: CONSTANT: COMPENSATE_CLOCK STRING "CLK0"
|
|
-- Retrieval info: CONSTANT: INCLK0_INPUT_FREQUENCY NUMERIC "20000"
|
|
-- Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone IV E"
|
|
-- Retrieval info: CONSTANT: LPM_TYPE STRING "altpll"
|
|
-- Retrieval info: CONSTANT: OPERATION_MODE STRING "NORMAL"
|
|
-- Retrieval info: CONSTANT: PLL_TYPE STRING "AUTO"
|
|
-- Retrieval info: CONSTANT: PORT_ACTIVECLOCK STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_ARESET STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_CLKBAD0 STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_CLKBAD1 STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_CLKLOSS STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_CLKSWITCH STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_CONFIGUPDATE STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_FBIN STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_INCLK0 STRING "PORT_USED"
|
|
-- Retrieval info: CONSTANT: PORT_INCLK1 STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_LOCKED STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_PFDENA STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_PHASECOUNTERSELECT STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_PHASEDONE STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_PHASESTEP STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_PHASEUPDOWN STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_PLLENA STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_SCANACLR STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_SCANCLK STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_SCANCLKENA STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_SCANDATA STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_SCANDATAOUT STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_SCANDONE STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_SCANREAD STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_SCANWRITE STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_clk0 STRING "PORT_USED"
|
|
-- Retrieval info: CONSTANT: PORT_clk1 STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_clk2 STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_clk3 STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_clk4 STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_clk5 STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_clkena0 STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_clkena1 STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_clkena2 STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_clkena3 STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_clkena4 STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_clkena5 STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_extclk0 STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_extclk1 STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_extclk2 STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: PORT_extclk3 STRING "PORT_UNUSED"
|
|
-- Retrieval info: CONSTANT: WIDTH_CLOCK NUMERIC "5"
|
|
-- Retrieval info: USED_PORT: @clk 0 0 5 0 OUTPUT_CLK_EXT VCC "@clk[4..0]"
|
|
-- Retrieval info: USED_PORT: @inclk 0 0 2 0 INPUT_CLK_EXT VCC "@inclk[1..0]"
|
|
-- Retrieval info: USED_PORT: c0 0 0 0 0 OUTPUT_CLK_EXT VCC "c0"
|
|
-- Retrieval info: USED_PORT: inclk0 0 0 0 0 INPUT_CLK_EXT GND "inclk0"
|
|
-- Retrieval info: CONNECT: @inclk 0 0 1 1 GND 0 0 0 0
|
|
-- Retrieval info: CONNECT: @inclk 0 0 1 0 inclk0 0 0 0 0
|
|
-- Retrieval info: CONNECT: c0 0 0 0 0 @clk 0 0 1 0
|
|
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll.vhd TRUE
|
|
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll.ppf TRUE
|
|
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll.inc FALSE
|
|
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll.cmp TRUE
|
|
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll.bsf FALSE
|
|
-- Retrieval info: GEN_FILE: TYPE_NORMAL pll_inst.vhd TRUE
|
|
-- Retrieval info: LIB_FILE: altera_mf
|
|
-- Retrieval info: CBX_MODULE_PREFIX: ON
|
|
|